About Pellet Press

1.What is a pellet press?

Pellet presses, aslo known as pellet mills are used for the compression of dusty materials into solid pellets, sometimes known as bio-pellets for heating.

2.How big is a pellet press?

Pellets presses /pellet mills are available in from 7.5kw to 30kw.

3.What can the pellets used for?

Pellets can be used in the production of animal feeds, or as fuel pellets for use in a pellet stove or boiler.

4.What are the pellets made from?

Pellets can be made from wood / sawdust / plastic / foam / wheat / barley / cotton and fibre waste. They also need a wet ingrediant, such as steam or molasses.

5.How are the pellets made?

The pellets are made by compacting the mash or meal into many small holes in a die. The die is usually round and the pellets are pushed from the inside out or opposite.

6.What size pellets are produced?

The length and diameter of the pellets are adjustable according to the size of the die in the pellet press.

7.What is the cost of pellet press?

Different capacity, different price.

8.How do you deliver the pellet presses?

Transport and worldwide shipping is available.

9.Are the pellet presses new or used?

All the machine are used with warranty available, advice is free.

10.What is small pellet press?

The small pellet press is flat die pellet press with smaller capacity.

11.What does the biomass pellet mill?

Biomass pellet mill is biomass particles into the biomass of machinery, diameter cylidrical range 6-8mm, suitable for all kinds of mechanical biomass materials, such as various sawdust, plant straw, etc.

12.What biomass pellet mill model is, yield is?

Biomass pellet mill models is KMPM42, KMPM580. The production of KMPM42 pellet mill A: KMPM42 pellet mill calculated in hours, 6mm output was 0.9-1.3 tons, 8mm output was 1-1.5 tons.  Power with KMPM42 pellet mill, and have how many motors? A: Power with KMPM42 pellet mill is 77.25KW, a total of four motor with it, main motor power is 75KW, conditioner power 1.5KW, speed feed motor is 0.75KW, forced feeding motor is. 0.75KW.

About Oil Press

1.What is a oil press?

Oil press is a machine tool for processing oil extraction.

2.What is the capacity of oil press?

The oil press produced by us have different capacities suitable for small, middle and big oil mills.

3.What is the kind of oil press?

There are three types of oil presses classified by the structures: small scale oil press, automatic combined oil press and big scales oil press with cooker.

4.What is the raw material for oil press?

The raw material can be various vegetable plants such as ground nuts,beans,rape and cotton seeds, sesame, olive, sunflower, coconuts, and grass seeds etc.

5.How to make vegetable oil from small oil presses?

The vegetable oil press of small capacity is composed with rings and screw in press chamber. There is control panel on the oil press. If you want to make oil from raw materials, you should clean them firstly, to remove the dust,stone and other impurity. When raw material prepared, you should let the oil pressing machine runing empty for a while for pre-heating of chamber. That can help the oil extracted out more successfully. After pre-heating for several minutes, you can feed material into the feeder of oil press. You can get the meal press for several time till there is no much oil in the meal.

6.How many kinds of vegetable oil presses?

The vegetable oil press mainly has three kinds from their structures: big scale oil press, small oil press and automated oil press combined with filter barrels. The big scale oil presses are applied in large oil mills. The small oil presses can be used for family to medium and small oil pressing workshop. The automated oil press combined with filter barrels are designed for personal use, which can save manpower from pressing and cleaning oil.

7.How to Use The Hopper?

Concerning the hopper, we need to understand how we can open and close the flow of the seed underneath the hopper.Let us to introduce this hopper for you. Usually, we should be open one feeder inlet on top of hopper; In order to it can bring max. capability. That is you can put max. quantity jatropha seeds in hopper;  And you can still storage new jatropha seeds. And we should be open feeder outlet at floor of hopper. And we design it is a subulate floor for this hopper. In order to this hopper didn't bring to dead angle inner hopper. And you can using old jatropha seeds for pressing jatropha oil.  And promise fitter moisture of jatropha seeds.